New Core Cloud C210 - New Energy Automotive Parts Industry Solution
Current developments in the new energy vehicle market, the challenges faced by the parts industry, and the digital transformation solutions provided by New Core Cloud for the new energy automotive parts industry along with its advantages. Key points include:
Development of the New Energy Vehicle Market: The fundamental driving force has shifted; policies, supply, and demand are driven by multiple factors, with subsidies declining and carbon neutrality policies prompting automakers to transform, ushering in a golden period for the market.
Industry Growth Data: In 2023, the production of new energy vehicles grew by 35.8% year-on-year, showing a clear trend of “reducing oil”; in 2022, sales increased by 37.9% year-on-year, with a penetration rate of 31.6%.
Industry Challenges: The automotive parts industry is under pressure across the supply chain; the manufacturing cost of new energy vehicles is 45% higher than that of fuel vehicles, and Tesla’s factory inspection has high requirements for digitalization levels of parts suppliers.
New Core Cloud Solutions: Covering multiple areas such as planning, manufacturing, quality, equipment, and logistics, offering various products to assist companies in digital transformation.
Advantages of New Core Cloud: Focusing on three major industries, serving over 3,600 clients, holding multiple number one positions in the MES market share, included in the recommended list for the Asia-Pacific region, and receiving multiple honors and certifications.
I. Market Insights
🚄 Multiple Drivers, the New Energy Vehicle Market Welcomes a Golden Development Period
The driving force at the bottom has shifted from a policy single-driver to a multi-factor-driven model encompassing policy, supply, and demand.
Subsidies for new energy continuously decline, and the driving force behind new energy vehicle policies gradually shifts from direct fiscal subsidies to soft administrative measures; policies with constraints and incentives such as the dual credit policy, license benefits in cities with license controls, and the national new infrastructure initiative for charging piles have become the main means by which the nation promotes the development of new energy vehicles;
Carbon neutrality policies continuously require vehicle manufacturers to undergo transformation, prompting new energy companies to plan new models and increase investment in capacity, high-quality supply stimulating market demand, and the market is gradually transitioning into a naturally growing state, welcoming a golden period of development.
🚀 Synergy Between Supply Side and Demand Side, Driving High-Speed Development of the Industry
Production of New Energy Vehicles in China from 2016 to 2023 (10,000 units)

From the supply side, in 2023, the production of new energy vehicles grew by 35.8% year-on-year
, leading companies like BYD have completely exited the fuel vehicle market, “reducing oil” has become the main trend
, and the supply side of new energy vehicles will continue to replace the existing market for fuel vehicles, achieving sustained rapid growth in production, driving supporting parts companies to enter the new track with a growth rate of over 100%
.
Sales of Automobiles and New Energy Vehicles in China from 2016 to 2023 (10,000 units)

From the demand side, influenced by high-quality market supply and rising fuel prices, in 2022, the sales of new energy vehicles increased by 37.9% year-on-year
, and the penetration rate of new energy vehicles in the automotive market has reached 31.6%
, with the track in an explosive period. This will further stimulate the supply side and promote the rapid development of the new energy vehicle industry.
⬇️ The Automotive Parts Industry’s Supply Chain Continuously Under Pressure

💰 High Manufacturing Costs for New Energy, Urgent Need to Reduce Costs and Increase Efficiency
Compared to fuel vehicles, the parts that have seen significant changes in new energy vehicles include the power transmission system and thermal management system; according to estimates by Vio Consulting, the cost of new energy vehicles is 45% higher than that of fuel vehicles, and to rapidly increase market share, new energy vehicles will inevitably continue to enhance cost-effectiveness, and reducing costs at the component level is one effective route.
💁 New Energy Vehicle Manufacturers’ Factory Inspection Standards Are High - Taking Tesla’s Standards as an Example
As a leader in the new energy vehicle industry, Tesla incorporates the digitalization level of factories into the assessment criteria when inspecting parts suppliers, requiring higher standards from component manufacturers, who must undergo digital transformation across the entire process to meet requirements during the main factory inspections.
😷 Pain Points in Management of the Automotive Parts Industry

II. Industry Digital Transformation Solutions
🏃 Digital Transformation Enhances Market Competitiveness of Enterprises

🏛 New Core Cloud Digital Factory IT Architecture
AI MOM Framework
🏢 New Core Cloud Digital Factory Product Architecture
Product Framework
1. Planning Domain
1.1 S | Workshop Planning - Professional Edition
Product ID: NCT-E002-2312
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Workshop Planning - Professional Edition” is initiated based on the production instructions generated by the MRP system and is guided by product delivery timelines, priorities, and workshop resource conditions to accurately allocate production tasks to matching workshops.
Intelligent One-Click Scheduling System
Convenient Planning Adjustment and Insertion Functions
Appendix: S | Workshop Planning - Professional Edition
1.2 A | Backup Planning
Product ID: NCT-E002-2312
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Backup Planning” is a strategic plan ensuring that enterprises can respond quickly and effectively when facing unforeseen circumstances, maintaining business continuity and stable operations.
Create Backup Orders Based on Maximum Inventory/Safety Stock
Backup Planning Calculations for MRP
Appendix: A | Backup Planning
1.3 A | Spraying Solution
Product ID: NCT-E002-2402
Product Status: Beta
Applicable Industries: C210-New Energy Automotive Parts
“Spraying Solution” covers key aspects of the entire spraying production process, including planning, task distribution, change management, material urging, equipment docking, and reporting.
Import Spraying Plan
Distribute Spraying Plan
Appendix: A | Spraying Solution
2. Manufacturing Domain
2.1 S | Serial Number (SN) Management
Product ID: NCT-E001-2077
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Serial Number (SN) Management” allows for full-link product management in the factory, operating according to SN for procurement, production, inspection, warehousing, packaging, and more.
SN Item Barcode Production
SN Item Barcode Inspection
Appendix: S | Serial Number (SN) Management
2.2 S | Bill of Materials (BOM) - Professional Edition
Product ID: NCT-E001-2016
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Bill of Materials (BOM) - Professional Edition” provides highly flexible BOM configuration and detailed version management to meet personalized customization needs, automatically generating SKUs and production BOMs, while ensuring accurate tracking of product evolution history, providing professional support for enterprises to achieve customized production and market agility.
BOM Configuration Operations
BOM Version Management
Appendix: S | Bill of Materials (BOM) - Professional Edition
2.3 S | Production Management - Professional Edition
Product ID: NCT-E002-2306
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Production Management - Professional Edition” effectively manages and controls all aspects of the production process through production scheduling management, quality management, and material management, achieving comprehensive monitoring and management of the production process.
Digital Production Execution Management
Digital Material Inbound and Outbound Management
Appendix: S | Production Management - Professional Edition
2.4 A | Production Reporting - Professional Edition - Multi-Process Workstation
Product ID: NCT-E002-1110
Product Status: Beta
Applicable Industries: C220-Equipment Manufacturing
C210-New Energy Automotive Parts
“Production Reporting - Professional Edition - Multi-Process Workstation” allows employees to complete different production tasks at the same workstation, recording relevant information through the reporting system.
Real-Time Information Synchronization
Appendix: 【A】| Production Reporting - Professional Edition - Multi-Process Workstation
2.5 S+ | Heat Treatment Solution
Product ID: NCT-E002-0043
Product Status: Alpha
Applicable Industries: C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Heat Treatment Solution” realizes comprehensive digital monitoring and control of the heat treatment process, optimizing and scheduling production plans, managing furnace batch numbers to improve resource utilization, and providing comprehensive data analysis and reporting functions, offering strong support for enterprise decision-making.
Heat Treatment Task Binding
Heat Treatment Data Binding
Appendix: S+ | Heat Treatment Solution
2.6 B | Work Management
Product ID: NCT-E002-0036
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Work Management” can flexibly assign production tasks based on attendance of on-site employees, combined with personnel skill matrices, representing a digital management strategy for employee mobility and allocation of production tasks.
Work Management
Down Work Management
Appendix: 【B】| Work Management
2.7 A | Spraying Solution
Product ID: NCT-E002-2402
Product Status: Beta
Applicable Industries: C210-New Energy Automotive Parts
“Spraying Solution” covers key aspects of the entire spraying production process, including planning, task distribution, change management, material urging, equipment docking, and reporting.
Material Urging Management
Production Reporting
Appendix: A | Spraying Solution
2.8 S | Container Management
2.9 A | SN Generation Rules - Industry Edition
Product ID: NCT-E001-0099
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
“SN Generation Rules - Industry Edition” achieves complete customizable configuration of SNs, meeting downstream customers' customization needs and mapping rules scenarios. At the same time, it also supports maintaining SN generation according to different production orders, further refining the granularity of SN generation.
Flexible Custom Scenario Rules
Support for Maintaining SN Generation Rules According to Different Production Orders
Appendix: 【A】 | SN Generation Rules - Industry Edition
3. Quality Domain
3.1 S | IPQC
Product ID: NCT-E002-2319
Product Status: Stable
Applicable Industries: C210-New Energy Automotive Parts
C230-Consumer Electronics
C220-Equipment Manufacturing
“IPQC” ensures that products in the production process meet established quality standards and specifications by regular or random sampling inspections.
Precise Quality Control
Comprehensive Quality Information Traceability
Appendix: S | IPQC
3.2 A | End-to-End Traceability (Batch)
Product ID: NCT-E002-0023
Product Status: Stable
Applicable Industries: C230-3C Smart Hardware
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Full Process Traceability (Batch)” not only tightly monitors the production line but also traces the entire value chain, ensuring each step continuously creates value.
Trace Full Process Operating Information
View Real-Time Locations and Dynamics by Time Dimension
Appendix: A | Full Process Traceability
3.3 A | End-to-End Traceability (SN)
Product ID: NCT-E002-2325
Product Status: Stable
Applicable Industries: C230-3C Smart Hardware
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Full Process Traceability (SN)” utilizes SN for precise tracking, covering all links from raw material procurement to production, inspection, warehousing, packaging, etc., allowing enterprises to promptly identify and resolve issues, significantly improving the efficiency and transparency of quality management.
Trace Full Process Operating Information via SN
Multi-Dimensional Post-Traceability
Appendix: A | Full Process Traceability
3.4 A | Change Management
Product ID: NCT-E002-0045
Product Status: Alpha
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Change Management” includes process automation, workflow management, access control, and change assessment, ensuring effective control over various changes. It helps enterprises monitor change situations in real-time, optimizing response strategies and improving decision-making efficiency.
Standardized Change Process
Efficient Change Notification Management
Appendix: A | Change Management
3.5 S | SPC
Product ID: NCT-E002-0046
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“SPC” presents the state changes in the production process through data statistics and uses the trends of these data for forecasting, helping quality managers to prevent the occurrence of quality issues.
10+ Types of Data Analysis Charts
Eight Major Standard Warning Rules
Appendix: S | SPC
3.6 B | Issue Management
Product ID: NCT-E002-0047
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Issue Management” addresses a series of material issues and defects arising during procurement, production inspection, sales, customer feedback, and equipment malfunction processes, forming a knowledge base for employees to learn.
Appendix: 【B】| Issue Management
3.7 A | Laboratory Management
Product ID: NCT-E001-0054
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Laboratory Management” solutions can optimize the assignment, tracking, and recording of inspection tasks, improving inspection efficiency while ensuring the accuracy and completeness of inspection data.
Maintain Inspection Types
Manage Inspection Tasks
Appendix: A | Laboratory Management
3.8 A | Non-Conforming Product Control
Product ID: NCT-E002-0048
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Non-Conforming Product Control” includes discovering non-conforming products, identification, isolation, approval, handling, and record tracking, through five steps and standardized processes to reduce the generation of non-conforming products and effectively handle the non-conforming products that have already occurred.
Mark \ Contain \ Sort Non-Conforming Products
Non-Conformance Approval
Appendix: A | Non-Conforming Product Control
4. Equipment Domain
4.1 A | Equipment Preventive Maintenance
Product ID: NCT-E003-2012
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Equipment Preventive Maintenance” solutions include equipment history files, equipment inspections, and maintenance features to regularly check and maintain equipment, effectively preventing potential issues, reducing downtime, and optimizing asset management.
Equipment History Management
Daily Equipment Inspections
Appendix: 【A】| Equipment Preventive Maintenance
5. Logistics Domain
5.1 A | Packaging Management
Product ID: NCT-E001-2359
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Packaging Management” functionalities for scanning packaging in production sites and warehouses include scanning to package products at the production site, scanning to package products in warehouses, product traceability, and data analysis.
Diverse Packaging Scenarios
Efficient Traceability
Appendix: 【A】| Packaging Management
6. KPI System
6.1 A | Equipment OEE Analysis
Product ID: NCT-E003-2006
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Equipment OEE Analysis” helps enterprises continuously improve equipment production performance by deep analysis of equipment data, timely discovery of potential issues, extending equipment life, lowering repair costs, and improving reliability.
Comprehensive Equipment OEE Analysis
Equipment Utilization Rate Analysis (Availability)
Appendix: 【A】| Equipment OEE Analysis
6.2 COREAdapter Integration Platform
6.2.1 | Serial Number (SN) Integration with Laser Engraving
https://xinheyun.feishu.cn/sync/G61cd3CA3swOMubFnBVcbPZunZc
“Serial Number (SN) Integration with Laser Engraving” is a product feature that integrates SN generation, laser coding, and one-click reporting, significantly shortening the coding time and facilitating subsequent processing and inspection operations by providing scanning and traceability sources.
SN Laser Coding
SN One-Click Reporting
Appendix: A | Serial Number (SN) Integration with Laser Engraving
New Core Cloud C210 - New Energy Automotive Parts Industry Solution
Current developments in the new energy vehicle market, the challenges faced by the parts industry, and the digital transformation solutions provided by New Core Cloud for the new energy automotive parts industry along with its advantages. Key points include:
Development of the New Energy Vehicle Market: The fundamental driving force has shifted; policies, supply, and demand are driven by multiple factors, with subsidies declining and carbon neutrality policies prompting automakers to transform, ushering in a golden period for the market.
Industry Growth Data: In 2023, the production of new energy vehicles grew by 35.8% year-on-year, showing a clear trend of “reducing oil”; in 2022, sales increased by 37.9% year-on-year, with a penetration rate of 31.6%.
Industry Challenges: The automotive parts industry is under pressure across the supply chain; the manufacturing cost of new energy vehicles is 45% higher than that of fuel vehicles, and Tesla’s factory inspection has high requirements for digitalization levels of parts suppliers.
New Core Cloud Solutions: Covering multiple areas such as planning, manufacturing, quality, equipment, and logistics, offering various products to assist companies in digital transformation.
Advantages of New Core Cloud: Focusing on three major industries, serving over 3,600 clients, holding multiple number one positions in the MES market share, included in the recommended list for the Asia-Pacific region, and receiving multiple honors and certifications.
I. Market Insights
🚄 Multiple Drivers, the New Energy Vehicle Market Welcomes a Golden Development Period
The driving force at the bottom has shifted from a policy single-driver to a multi-factor-driven model encompassing policy, supply, and demand.
Subsidies for new energy continuously decline, and the driving force behind new energy vehicle policies gradually shifts from direct fiscal subsidies to soft administrative measures; policies with constraints and incentives such as the dual credit policy, license benefits in cities with license controls, and the national new infrastructure initiative for charging piles have become the main means by which the nation promotes the development of new energy vehicles;
Carbon neutrality policies continuously require vehicle manufacturers to undergo transformation, prompting new energy companies to plan new models and increase investment in capacity, high-quality supply stimulating market demand, and the market is gradually transitioning into a naturally growing state, welcoming a golden period of development.
🚀 Synergy Between Supply Side and Demand Side, Driving High-Speed Development of the Industry
Production of New Energy Vehicles in China from 2016 to 2023 (10,000 units)

From the supply side, in 2023, the production of new energy vehicles grew by 35.8% year-on-year
, leading companies like BYD have completely exited the fuel vehicle market, “reducing oil” has become the main trend
, and the supply side of new energy vehicles will continue to replace the existing market for fuel vehicles, achieving sustained rapid growth in production, driving supporting parts companies to enter the new track with a growth rate of over 100%
.
Sales of Automobiles and New Energy Vehicles in China from 2016 to 2023 (10,000 units)

From the demand side, influenced by high-quality market supply and rising fuel prices, in 2022, the sales of new energy vehicles increased by 37.9% year-on-year
, and the penetration rate of new energy vehicles in the automotive market has reached 31.6%
, with the track in an explosive period. This will further stimulate the supply side and promote the rapid development of the new energy vehicle industry.
⬇️ The Automotive Parts Industry’s Supply Chain Continuously Under Pressure

💰 High Manufacturing Costs for New Energy, Urgent Need to Reduce Costs and Increase Efficiency
Compared to fuel vehicles, the parts that have seen significant changes in new energy vehicles include the power transmission system and thermal management system; according to estimates by Vio Consulting, the cost of new energy vehicles is 45% higher than that of fuel vehicles, and to rapidly increase market share, new energy vehicles will inevitably continue to enhance cost-effectiveness, and reducing costs at the component level is one effective route.
💁 New Energy Vehicle Manufacturers’ Factory Inspection Standards Are High - Taking Tesla’s Standards as an Example
As a leader in the new energy vehicle industry, Tesla incorporates the digitalization level of factories into the assessment criteria when inspecting parts suppliers, requiring higher standards from component manufacturers, who must undergo digital transformation across the entire process to meet requirements during the main factory inspections.
😷 Pain Points in Management of the Automotive Parts Industry

II. Industry Digital Transformation Solutions
🏃 Digital Transformation Enhances Market Competitiveness of Enterprises

🏛 New Core Cloud Digital Factory IT Architecture
AI MOM Framework
🏢 New Core Cloud Digital Factory Product Architecture
Product Framework
1. Planning Domain
1.1 S | Workshop Planning - Professional Edition
Product ID: NCT-E002-2312
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Workshop Planning - Professional Edition” is initiated based on the production instructions generated by the MRP system and is guided by product delivery timelines, priorities, and workshop resource conditions to accurately allocate production tasks to matching workshops.
Intelligent One-Click Scheduling System
Convenient Planning Adjustment and Insertion Functions
Appendix: S | Workshop Planning - Professional Edition
1.2 A | Backup Planning
Product ID: NCT-E002-2312
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Backup Planning” is a strategic plan ensuring that enterprises can respond quickly and effectively when facing unforeseen circumstances, maintaining business continuity and stable operations.
Create Backup Orders Based on Maximum Inventory/Safety Stock
Backup Planning Calculations for MRP
Appendix: A | Backup Planning
1.3 A | Spraying Solution
Product ID: NCT-E002-2402
Product Status: Beta
Applicable Industries: C210-New Energy Automotive Parts
“Spraying Solution” covers key aspects of the entire spraying production process, including planning, task distribution, change management, material urging, equipment docking, and reporting.
Import Spraying Plan
Distribute Spraying Plan
Appendix: A | Spraying Solution
2. Manufacturing Domain
2.1 S | Serial Number (SN) Management
Product ID: NCT-E001-2077
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Serial Number (SN) Management” allows for full-link product management in the factory, operating according to SN for procurement, production, inspection, warehousing, packaging, and more.
SN Item Barcode Production
SN Item Barcode Inspection
Appendix: S | Serial Number (SN) Management
2.2 S | Bill of Materials (BOM) - Professional Edition
Product ID: NCT-E001-2016
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Bill of Materials (BOM) - Professional Edition” provides highly flexible BOM configuration and detailed version management to meet personalized customization needs, automatically generating SKUs and production BOMs, while ensuring accurate tracking of product evolution history, providing professional support for enterprises to achieve customized production and market agility.
BOM Configuration Operations
BOM Version Management
Appendix: S | Bill of Materials (BOM) - Professional Edition
2.3 S | Production Management - Professional Edition
Product ID: NCT-E002-2306
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Production Management - Professional Edition” effectively manages and controls all aspects of the production process through production scheduling management, quality management, and material management, achieving comprehensive monitoring and management of the production process.
Digital Production Execution Management
Digital Material Inbound and Outbound Management
Appendix: S | Production Management - Professional Edition
2.4 A | Production Reporting - Professional Edition - Multi-Process Workstation
Product ID: NCT-E002-1110
Product Status: Beta
Applicable Industries: C220-Equipment Manufacturing
C210-New Energy Automotive Parts
“Production Reporting - Professional Edition - Multi-Process Workstation” allows employees to complete different production tasks at the same workstation, recording relevant information through the reporting system.
Real-Time Information Synchronization
Appendix: 【A】| Production Reporting - Professional Edition - Multi-Process Workstation
2.5 S+ | Heat Treatment Solution
Product ID: NCT-E002-0043
Product Status: Alpha
Applicable Industries: C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Heat Treatment Solution” realizes comprehensive digital monitoring and control of the heat treatment process, optimizing and scheduling production plans, managing furnace batch numbers to improve resource utilization, and providing comprehensive data analysis and reporting functions, offering strong support for enterprise decision-making.
Heat Treatment Task Binding
Heat Treatment Data Binding
Appendix: S+ | Heat Treatment Solution
2.6 B | Work Management
Product ID: NCT-E002-0036
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Work Management” can flexibly assign production tasks based on attendance of on-site employees, combined with personnel skill matrices, representing a digital management strategy for employee mobility and allocation of production tasks.
Work Management
Down Work Management
Appendix: 【B】| Work Management
2.7 A | Spraying Solution
Product ID: NCT-E002-2402
Product Status: Beta
Applicable Industries: C210-New Energy Automotive Parts
“Spraying Solution” covers key aspects of the entire spraying production process, including planning, task distribution, change management, material urging, equipment docking, and reporting.
Material Urging Management
Production Reporting
Appendix: A | Spraying Solution
2.8 S | Container Management
2.9 A | SN Generation Rules - Industry Edition
Product ID: NCT-E001-0099
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
“SN Generation Rules - Industry Edition” achieves complete customizable configuration of SNs, meeting downstream customers' customization needs and mapping rules scenarios. At the same time, it also supports maintaining SN generation according to different production orders, further refining the granularity of SN generation.
Flexible Custom Scenario Rules
Support for Maintaining SN Generation Rules According to Different Production Orders
Appendix: 【A】 | SN Generation Rules - Industry Edition
3. Quality Domain
3.1 S | IPQC
Product ID: NCT-E002-2319
Product Status: Stable
Applicable Industries: C210-New Energy Automotive Parts
C230-Consumer Electronics
C220-Equipment Manufacturing
“IPQC” ensures that products in the production process meet established quality standards and specifications by regular or random sampling inspections.
Precise Quality Control
Comprehensive Quality Information Traceability
Appendix: S | IPQC
3.2 A | End-to-End Traceability (Batch)
Product ID: NCT-E002-0023
Product Status: Stable
Applicable Industries: C230-3C Smart Hardware
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Full Process Traceability (Batch)” not only tightly monitors the production line but also traces the entire value chain, ensuring each step continuously creates value.
Trace Full Process Operating Information
View Real-Time Locations and Dynamics by Time Dimension
Appendix: A | Full Process Traceability
3.3 A | End-to-End Traceability (SN)
Product ID: NCT-E002-2325
Product Status: Stable
Applicable Industries: C230-3C Smart Hardware
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Full Process Traceability (SN)” utilizes SN for precise tracking, covering all links from raw material procurement to production, inspection, warehousing, packaging, etc., allowing enterprises to promptly identify and resolve issues, significantly improving the efficiency and transparency of quality management.
Trace Full Process Operating Information via SN
Multi-Dimensional Post-Traceability
Appendix: A | Full Process Traceability
3.4 A | Change Management
Product ID: NCT-E002-0045
Product Status: Alpha
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Change Management” includes process automation, workflow management, access control, and change assessment, ensuring effective control over various changes. It helps enterprises monitor change situations in real-time, optimizing response strategies and improving decision-making efficiency.
Standardized Change Process
Efficient Change Notification Management
Appendix: A | Change Management
3.5 S | SPC
Product ID: NCT-E002-0046
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“SPC” presents the state changes in the production process through data statistics and uses the trends of these data for forecasting, helping quality managers to prevent the occurrence of quality issues.
10+ Types of Data Analysis Charts
Eight Major Standard Warning Rules
Appendix: S | SPC
3.6 B | Issue Management
Product ID: NCT-E002-0047
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Issue Management” addresses a series of material issues and defects arising during procurement, production inspection, sales, customer feedback, and equipment malfunction processes, forming a knowledge base for employees to learn.
Appendix: 【B】| Issue Management
3.7 A | Laboratory Management
Product ID: NCT-E001-0054
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Laboratory Management” solutions can optimize the assignment, tracking, and recording of inspection tasks, improving inspection efficiency while ensuring the accuracy and completeness of inspection data.
Maintain Inspection Types
Manage Inspection Tasks
Appendix: A | Laboratory Management
3.8 A | Non-Conforming Product Control
Product ID: NCT-E002-0048
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Non-Conforming Product Control” includes discovering non-conforming products, identification, isolation, approval, handling, and record tracking, through five steps and standardized processes to reduce the generation of non-conforming products and effectively handle the non-conforming products that have already occurred.
Mark \ Contain \ Sort Non-Conforming Products
Non-Conformance Approval
Appendix: A | Non-Conforming Product Control
4. Equipment Domain
4.1 A | Equipment Preventive Maintenance
Product ID: NCT-E003-2012
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Equipment Preventive Maintenance” solutions include equipment history files, equipment inspections, and maintenance features to regularly check and maintain equipment, effectively preventing potential issues, reducing downtime, and optimizing asset management.
Equipment History Management
Daily Equipment Inspections
Appendix: 【A】| Equipment Preventive Maintenance
5. Logistics Domain
5.1 A | Packaging Management
Product ID: NCT-E001-2359
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Packaging Management” functionalities for scanning packaging in production sites and warehouses include scanning to package products at the production site, scanning to package products in warehouses, product traceability, and data analysis.
Diverse Packaging Scenarios
Efficient Traceability
Appendix: 【A】| Packaging Management
6. KPI System
6.1 A | Equipment OEE Analysis
Product ID: NCT-E003-2006
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Equipment OEE Analysis” helps enterprises continuously improve equipment production performance by deep analysis of equipment data, timely discovery of potential issues, extending equipment life, lowering repair costs, and improving reliability.
Comprehensive Equipment OEE Analysis
Equipment Utilization Rate Analysis (Availability)
Appendix: 【A】| Equipment OEE Analysis
6.2 COREAdapter Integration Platform
6.2.1 | Serial Number (SN) Integration with Laser Engraving
https://xinheyun.feishu.cn/sync/G61cd3CA3swOMubFnBVcbPZunZc
“Serial Number (SN) Integration with Laser Engraving” is a product feature that integrates SN generation, laser coding, and one-click reporting, significantly shortening the coding time and facilitating subsequent processing and inspection operations by providing scanning and traceability sources.
SN Laser Coding
SN One-Click Reporting
Appendix: A | Serial Number (SN) Integration with Laser Engraving
New Core Cloud C210 - New Energy Automotive Parts Industry Solution
Current developments in the new energy vehicle market, the challenges faced by the parts industry, and the digital transformation solutions provided by New Core Cloud for the new energy automotive parts industry along with its advantages. Key points include:
Development of the New Energy Vehicle Market: The fundamental driving force has shifted; policies, supply, and demand are driven by multiple factors, with subsidies declining and carbon neutrality policies prompting automakers to transform, ushering in a golden period for the market.
Industry Growth Data: In 2023, the production of new energy vehicles grew by 35.8% year-on-year, showing a clear trend of “reducing oil”; in 2022, sales increased by 37.9% year-on-year, with a penetration rate of 31.6%.
Industry Challenges: The automotive parts industry is under pressure across the supply chain; the manufacturing cost of new energy vehicles is 45% higher than that of fuel vehicles, and Tesla’s factory inspection has high requirements for digitalization levels of parts suppliers.
New Core Cloud Solutions: Covering multiple areas such as planning, manufacturing, quality, equipment, and logistics, offering various products to assist companies in digital transformation.
Advantages of New Core Cloud: Focusing on three major industries, serving over 3,600 clients, holding multiple number one positions in the MES market share, included in the recommended list for the Asia-Pacific region, and receiving multiple honors and certifications.
I. Market Insights
🚄 Multiple Drivers, the New Energy Vehicle Market Welcomes a Golden Development Period
The driving force at the bottom has shifted from a policy single-driver to a multi-factor-driven model encompassing policy, supply, and demand.
Subsidies for new energy continuously decline, and the driving force behind new energy vehicle policies gradually shifts from direct fiscal subsidies to soft administrative measures; policies with constraints and incentives such as the dual credit policy, license benefits in cities with license controls, and the national new infrastructure initiative for charging piles have become the main means by which the nation promotes the development of new energy vehicles;
Carbon neutrality policies continuously require vehicle manufacturers to undergo transformation, prompting new energy companies to plan new models and increase investment in capacity, high-quality supply stimulating market demand, and the market is gradually transitioning into a naturally growing state, welcoming a golden period of development.
🚀 Synergy Between Supply Side and Demand Side, Driving High-Speed Development of the Industry
Production of New Energy Vehicles in China from 2016 to 2023 (10,000 units)

From the supply side, in 2023, the production of new energy vehicles grew by 35.8% year-on-year
, leading companies like BYD have completely exited the fuel vehicle market, “reducing oil” has become the main trend
, and the supply side of new energy vehicles will continue to replace the existing market for fuel vehicles, achieving sustained rapid growth in production, driving supporting parts companies to enter the new track with a growth rate of over 100%
.
Sales of Automobiles and New Energy Vehicles in China from 2016 to 2023 (10,000 units)

From the demand side, influenced by high-quality market supply and rising fuel prices, in 2022, the sales of new energy vehicles increased by 37.9% year-on-year
, and the penetration rate of new energy vehicles in the automotive market has reached 31.6%
, with the track in an explosive period. This will further stimulate the supply side and promote the rapid development of the new energy vehicle industry.
⬇️ The Automotive Parts Industry’s Supply Chain Continuously Under Pressure

💰 High Manufacturing Costs for New Energy, Urgent Need to Reduce Costs and Increase Efficiency
Compared to fuel vehicles, the parts that have seen significant changes in new energy vehicles include the power transmission system and thermal management system; according to estimates by Vio Consulting, the cost of new energy vehicles is 45% higher than that of fuel vehicles, and to rapidly increase market share, new energy vehicles will inevitably continue to enhance cost-effectiveness, and reducing costs at the component level is one effective route.
💁 New Energy Vehicle Manufacturers’ Factory Inspection Standards Are High - Taking Tesla’s Standards as an Example
As a leader in the new energy vehicle industry, Tesla incorporates the digitalization level of factories into the assessment criteria when inspecting parts suppliers, requiring higher standards from component manufacturers, who must undergo digital transformation across the entire process to meet requirements during the main factory inspections.
😷 Pain Points in Management of the Automotive Parts Industry

II. Industry Digital Transformation Solutions
🏃 Digital Transformation Enhances Market Competitiveness of Enterprises

🏛 New Core Cloud Digital Factory IT Architecture
AI MOM Framework
🏢 New Core Cloud Digital Factory Product Architecture
Product Framework
1. Planning Domain
1.1 S | Workshop Planning - Professional Edition
Product ID: NCT-E002-2312
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Workshop Planning - Professional Edition” is initiated based on the production instructions generated by the MRP system and is guided by product delivery timelines, priorities, and workshop resource conditions to accurately allocate production tasks to matching workshops.
Intelligent One-Click Scheduling System
Convenient Planning Adjustment and Insertion Functions
Appendix: S | Workshop Planning - Professional Edition
1.2 A | Backup Planning
Product ID: NCT-E002-2312
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Backup Planning” is a strategic plan ensuring that enterprises can respond quickly and effectively when facing unforeseen circumstances, maintaining business continuity and stable operations.
Create Backup Orders Based on Maximum Inventory/Safety Stock
Backup Planning Calculations for MRP
Appendix: A | Backup Planning
1.3 A | Spraying Solution
Product ID: NCT-E002-2402
Product Status: Beta
Applicable Industries: C210-New Energy Automotive Parts
“Spraying Solution” covers key aspects of the entire spraying production process, including planning, task distribution, change management, material urging, equipment docking, and reporting.
Import Spraying Plan
Distribute Spraying Plan
Appendix: A | Spraying Solution
2. Manufacturing Domain
2.1 S | Serial Number (SN) Management
Product ID: NCT-E001-2077
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Serial Number (SN) Management” allows for full-link product management in the factory, operating according to SN for procurement, production, inspection, warehousing, packaging, and more.
SN Item Barcode Production
SN Item Barcode Inspection
Appendix: S | Serial Number (SN) Management
2.2 S | Bill of Materials (BOM) - Professional Edition
Product ID: NCT-E001-2016
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Bill of Materials (BOM) - Professional Edition” provides highly flexible BOM configuration and detailed version management to meet personalized customization needs, automatically generating SKUs and production BOMs, while ensuring accurate tracking of product evolution history, providing professional support for enterprises to achieve customized production and market agility.
BOM Configuration Operations
BOM Version Management
Appendix: S | Bill of Materials (BOM) - Professional Edition
2.3 S | Production Management - Professional Edition
Product ID: NCT-E002-2306
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Production Management - Professional Edition” effectively manages and controls all aspects of the production process through production scheduling management, quality management, and material management, achieving comprehensive monitoring and management of the production process.
Digital Production Execution Management
Digital Material Inbound and Outbound Management
Appendix: S | Production Management - Professional Edition
2.4 A | Production Reporting - Professional Edition - Multi-Process Workstation
Product ID: NCT-E002-1110
Product Status: Beta
Applicable Industries: C220-Equipment Manufacturing
C210-New Energy Automotive Parts
“Production Reporting - Professional Edition - Multi-Process Workstation” allows employees to complete different production tasks at the same workstation, recording relevant information through the reporting system.
Real-Time Information Synchronization
Appendix: 【A】| Production Reporting - Professional Edition - Multi-Process Workstation
2.5 S+ | Heat Treatment Solution
Product ID: NCT-E002-0043
Product Status: Alpha
Applicable Industries: C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Heat Treatment Solution” realizes comprehensive digital monitoring and control of the heat treatment process, optimizing and scheduling production plans, managing furnace batch numbers to improve resource utilization, and providing comprehensive data analysis and reporting functions, offering strong support for enterprise decision-making.
Heat Treatment Task Binding
Heat Treatment Data Binding
Appendix: S+ | Heat Treatment Solution
2.6 B | Work Management
Product ID: NCT-E002-0036
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Work Management” can flexibly assign production tasks based on attendance of on-site employees, combined with personnel skill matrices, representing a digital management strategy for employee mobility and allocation of production tasks.
Work Management
Down Work Management
Appendix: 【B】| Work Management
2.7 A | Spraying Solution
Product ID: NCT-E002-2402
Product Status: Beta
Applicable Industries: C210-New Energy Automotive Parts
“Spraying Solution” covers key aspects of the entire spraying production process, including planning, task distribution, change management, material urging, equipment docking, and reporting.
Material Urging Management
Production Reporting
Appendix: A | Spraying Solution
2.8 S | Container Management
2.9 A | SN Generation Rules - Industry Edition
Product ID: NCT-E001-0099
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
“SN Generation Rules - Industry Edition” achieves complete customizable configuration of SNs, meeting downstream customers' customization needs and mapping rules scenarios. At the same time, it also supports maintaining SN generation according to different production orders, further refining the granularity of SN generation.
Flexible Custom Scenario Rules
Support for Maintaining SN Generation Rules According to Different Production Orders
Appendix: 【A】 | SN Generation Rules - Industry Edition
3. Quality Domain
3.1 S | IPQC
Product ID: NCT-E002-2319
Product Status: Stable
Applicable Industries: C210-New Energy Automotive Parts
C230-Consumer Electronics
C220-Equipment Manufacturing
“IPQC” ensures that products in the production process meet established quality standards and specifications by regular or random sampling inspections.
Precise Quality Control
Comprehensive Quality Information Traceability
Appendix: S | IPQC
3.2 A | End-to-End Traceability (Batch)
Product ID: NCT-E002-0023
Product Status: Stable
Applicable Industries: C230-3C Smart Hardware
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Full Process Traceability (Batch)” not only tightly monitors the production line but also traces the entire value chain, ensuring each step continuously creates value.
Trace Full Process Operating Information
View Real-Time Locations and Dynamics by Time Dimension
Appendix: A | Full Process Traceability
3.3 A | End-to-End Traceability (SN)
Product ID: NCT-E002-2325
Product Status: Stable
Applicable Industries: C230-3C Smart Hardware
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Full Process Traceability (SN)” utilizes SN for precise tracking, covering all links from raw material procurement to production, inspection, warehousing, packaging, etc., allowing enterprises to promptly identify and resolve issues, significantly improving the efficiency and transparency of quality management.
Trace Full Process Operating Information via SN
Multi-Dimensional Post-Traceability
Appendix: A | Full Process Traceability
3.4 A | Change Management
Product ID: NCT-E002-0045
Product Status: Alpha
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Change Management” includes process automation, workflow management, access control, and change assessment, ensuring effective control over various changes. It helps enterprises monitor change situations in real-time, optimizing response strategies and improving decision-making efficiency.
Standardized Change Process
Efficient Change Notification Management
Appendix: A | Change Management
3.5 S | SPC
Product ID: NCT-E002-0046
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“SPC” presents the state changes in the production process through data statistics and uses the trends of these data for forecasting, helping quality managers to prevent the occurrence of quality issues.
10+ Types of Data Analysis Charts
Eight Major Standard Warning Rules
Appendix: S | SPC
3.6 B | Issue Management
Product ID: NCT-E002-0047
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Issue Management” addresses a series of material issues and defects arising during procurement, production inspection, sales, customer feedback, and equipment malfunction processes, forming a knowledge base for employees to learn.
Appendix: 【B】| Issue Management
3.7 A | Laboratory Management
Product ID: NCT-E001-0054
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Laboratory Management” solutions can optimize the assignment, tracking, and recording of inspection tasks, improving inspection efficiency while ensuring the accuracy and completeness of inspection data.
Maintain Inspection Types
Manage Inspection Tasks
Appendix: A | Laboratory Management
3.8 A | Non-Conforming Product Control
Product ID: NCT-E002-0048
Product Status: Beta
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Non-Conforming Product Control” includes discovering non-conforming products, identification, isolation, approval, handling, and record tracking, through five steps and standardized processes to reduce the generation of non-conforming products and effectively handle the non-conforming products that have already occurred.
Mark \ Contain \ Sort Non-Conforming Products
Non-Conformance Approval
Appendix: A | Non-Conforming Product Control
4. Equipment Domain
4.1 A | Equipment Preventive Maintenance
Product ID: NCT-E003-2012
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Equipment Preventive Maintenance” solutions include equipment history files, equipment inspections, and maintenance features to regularly check and maintain equipment, effectively preventing potential issues, reducing downtime, and optimizing asset management.
Equipment History Management
Daily Equipment Inspections
Appendix: 【A】| Equipment Preventive Maintenance
5. Logistics Domain
5.1 A | Packaging Management
Product ID: NCT-E001-2359
Product Status: Stable
Applicable Industries: C230-
Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Packaging Management” functionalities for scanning packaging in production sites and warehouses include scanning to package products at the production site, scanning to package products in warehouses, product traceability, and data analysis.
Diverse Packaging Scenarios
Efficient Traceability
Appendix: 【A】| Packaging Management
6. KPI System
6.1 A | Equipment OEE Analysis
Product ID: NCT-E003-2006
Product Status: Stable
Applicable Industries: C230-Consumer Electronics
C210-New Energy Automotive Parts
C220-Equipment Manufacturing
“Equipment OEE Analysis” helps enterprises continuously improve equipment production performance by deep analysis of equipment data, timely discovery of potential issues, extending equipment life, lowering repair costs, and improving reliability.
Comprehensive Equipment OEE Analysis
Equipment Utilization Rate Analysis (Availability)
Appendix: 【A】| Equipment OEE Analysis
6.2 COREAdapter Integration Platform
6.2.1 | Serial Number (SN) Integration with Laser Engraving
https://xinheyun.feishu.cn/sync/G61cd3CA3swOMubFnBVcbPZunZc
“Serial Number (SN) Integration with Laser Engraving” is a product feature that integrates SN generation, laser coding, and one-click reporting, significantly shortening the coding time and facilitating subsequent processing and inspection operations by providing scanning and traceability sources.
SN Laser Coding
SN One-Click Reporting
Appendix: A | Serial Number (SN) Integration with Laser Engraving